Suppliers

Blogs

How to Propagate Peperomia: The Right Way

Hello fellow gardeners, we hope that you are doing well today. You are here to learn about how to propagate peperomia plants.

We have you covered, in this article, we will share everything you need to know about propagating peperomia plants. 

But before we jump into our handy dandy step-by-step guide we will need to take a look at when the best time to propagate peperomia plants will be.

How to Propagate Peperomia

When To Propagate Peperomia

The best time to propagate a peperomia plant is in the spring. This is because spring and summer is when plants enter their time of growth.

This means that mother plants are more likely to quickly recover from cuttings and propagate peperomia plants will more quickly grow roots as well. 

You Can Use The Water Method

If you want to propagate but do not want to get too dirty, using water propagation to make new baby peperomia plants is a fantastic way to achieve this.

Your peperomia stems will sprout their roots in water and only after this happens you will be planting them in soil.

But before we can get into how you propagate, we need to make sure that you have all the tools that you will require. So, let’s take a look:

What Do You Need? 

Below we have listed a few things you will need to water propagate a peperomia plant. 

  • Cutting Implement – You will need a cutting implement. It is recommended that you use a pair of sharp scissors or garden clippers. It is essential that whatever you use is sharp and sterile. This is to avoid jagged cuts on the mother plant
  • Cutting – A cutting from a grown peperomia plant is essential for propagation. Make sure that you harvest a stem with leaves and notes from a healthy mother plant. 
  • Glass Container – You will need a glass container to hold your clippings. We recommend using a jar or glass cup. 
  • Water – You will need filtered or distilled water. Tap water often has chemicals like chlorine which can be detrimental to the development of your peperomia plant.  
  • Plant Pot – When the plant has developed roots you will need a plant pot to transplant your peperomia plant into. 
  • Soil – You will need a perlite and peat moss soil for your cuttings once they have developed a good root system. 

Step-By-Step Guide

  • Step 1 – The first thing you will need to do is harvest a few cuttings. More than one cutting gives you a higher chance of success. When you get your cutting, make sure that it has a few leaves on the top, a few inches of stem, and a few nodes to work with. Before you cut, make sure your scissors or clippers are sharp and sterile. You do not want to excessively damage your mother plant. 
  • Step 2 – Once you have your stem cuttings you can put them in a jar, bottle, or glass. Make sure that they are not crowded. It might be better to have several glasses to allow the cuttings the space they need to thrive. With your cuttings in a container, add enough water so that at least one or two nodes are submerged. It is essential that the whole stem is not submerged as this will reduce the cuttings’ ability to get sufficient oxygen.
  • Step 3 – Now all you have to do is place your cuttings in a nice warm spot with indirect sunlight. Change the water every week so that your plants get fresh nutrients. After about two to six weeks you should see roots developing from the nodes on the stem. 
  • Step 4 – When you see enough development happen and the root system looks fairly well-developed you are free to plant your peperomia plant. 

You Can Use the Soil Method

One of the most common methods of propagation of the peperomia plant is the soil method. It is super easy and definitely something even a beginner gardener will succeed in.

You Can Use the Soil Method

You just need the right tools, guidance, a bit of luck, and you will be well on your way to creating a brand-new peperomia plant using a cutting and some soil.

But before we can start looking at how to propagate using soil, we must look at what we will need. 

Related: Peperomia Hope: A Complete and Concise Care, Propagation, and Watering Guide

What Do You Need? 

Before we can look at how to propagate peperomia plants using the stem cutting method it is important that we take a look at what we will require. 

  • Peperomia Cutting – You will, of course, require a plant cutting from a peperomia plant. Whether you are getting one from your friend’s plant or your own, just make sure that there are healthy green leaves on your cutting, and you have a few inches of stem to work with. 
  • Cutting Implement – You will need a pair of sharp scissors or gardening clippers. Make sure that whatever you use is sharp and sterile so that the mother plant does not have jagged edges when cut. 
  • Plant Pot – You will need small plant pots to house your cuttings while they grow big and strong. 
  • Soil – You will require a well-draining soil for your peperomia plants. It is recommended that you use a peat moss and perlite mixture for the best results. 
  • Plastic Covering – In the early stages, your plant will need a plastic covering to keep the moisture and warmth in. You can use a plastic bag or a soda bottle. 
  • Water – You will need water in order to make the soil moist before planting your cuttings. It would be best if you use filtered or distilled water initially. Some tap water has chemicals like chlorine which can affect your new plants growth. 

Step-By-Step Guide

  • Step 1 – Before you get your cutting from the mother plant it is a good idea to prepare your plant pots and soil. So, get your small plant pots and fill them up with soil. It is recommended that the soil is moist before you put the cuttings in the pits. Once you have your pot sorted, you can get your cutting implement like a pair of scissors or gardening shears and clean/sterilize them. As a side note, it is important to make sure that your cutting implement is sharp so that you do not make jagged cuts on the mother plant. 
  • Step 2 – Now that you have your cuttings, it is essential that you move quickly. The most time you should wait before planting your cuttings is two hours. But, the sooner you get them in the ground the better. Anyway, once you have your cuttings you should dip the end in a rooting powder to make your cutting develop roots at a faster rate. Place the cuttings in the soil so that they stand upright, pat down the soil around the cutting to compact the ground, and make sure that the cutting is secure in its spot. 
  • Step 3 – Now that you have potted your peperomia plant you will need to create the optimal environment for it. You will need a plastic bag for this part. Poke a few holes in it before placing it over the top of your cutting, you can use chopsticks or sticks to make sure that the leaves do not touch the sides of the plastic. If you do not have a plastic bag at hand, you can use a soda bottle. Cut the spout off, poke some holes in the base, and put it over your peperomia plant. 
  • Step 4 – Now that you have a covering for your peperomia plant you must now find an ideal location for it to stay while it grows. It is recommended that you put your cutting in a place that will be room temperature and not in full sunlight. The plastic covering will give your peperomia plant a wonderfully humid environment which is exactly what it needs to grow. 
  • Step 5 – All that is left is to care for your cutting. Make sure to keep the soil moist but take care to not get it too soggy. Every few days you should take your plastic covering or dome off the plant so that it gets some fresh air. This will reduce the risk of rot setting in and prematurely killing your peperomia plant. When you start to see new leaves or branches growing from your cutting you can take the plastic off the plant indefinitely. Before you think about transplanting your cutting you will need to make sure that there is ample growth. There is no reason to rush replanting peperomia because they actually like to be root bound. So, be patient and wait until your plant has grown quite a bit before you re-pot it. 

Frequently Asked Questions

Below we have answered several questions surrounding the peperomia plant and the propagation process. So, without further ado, let us just right in. 

Why Is Peperomia Leggy?

A peperomia plant might be leggy because of inadequate lighting. If you notice your peperomia plant is becoming more sparse it is likely because it is not getting enough light.

In fact, if you give these plants too much light they are likely to do much better than if you were to give them too little. So,

if you see that your peperomia is a little leggy, the first thing you should try is moving it to a more sunny spot in your house. 

Should You Trim A Peperomia Plant? 

A peperomia plant is a tropical plant and tends to grow continuously throughout the year. Because of this fact you are able to trim or prune this plant as you see fit.

However, the best time to prune a peperomia plant is in the spring or summer because the sun and warmth allow for this plant to recover from being trimmed much faster. 

How Do You Divide A Peperomia Plant? 

You divide a peperomia plant by dividing the mother plant into smaller plants, just make sure that each piece you divide has a root system.

Carefully untangle roots and only cut what you have to when you are dividing the peperomia plant. 

Should You Mist A Peperomia Plant?

Misting is a great way to make sure that your peperomia plant gets all the moisture that it needs. It is recommended that you mist your peperomia plant every day or even every second day for the best results.

While forgetting to mist will not kill your plant it can make a big difference to the overall plant. So, best-case scenario, make sure to mist daily, if you can’t manage that make sure to mist your peperomia plant at least once a week. 

Why Is Peperomia Called The Radiator Plant?

The name ‘radiator plant’ comes from the fact that the peperomia plant loves warm drafts and because of this the ideal place for them is near a warm vent or radiator. 

Can You Propagate Peperomia Using Leaves? 

Yes, you can! We have not covered this exact type of propagation here, but you can definitely grow a whole new plant using just a leaf.

If you want to propagate using just a leaf you should use the soil method. In fact, you will use much the same method as the stem cutting method.

The only difference is that you will need to harvest leaves with a bit of a stem and plant those. It really is as easy as that.

So whether you want to use a stem cutting or a leaf cutting, you can rest assured that you will be able to easily propagate a whole new peperomia plant. 

Final Thoughts

Peperomia plants make an excellent addition to anyone’s home. They are easy plants to take care of and quite beautiful when you appreciate the colorful and beautiful leaves.

Propagating these plants is super easy and something that you could quite easily do without much hassle. 

That is all for this article. We hope that you have a fantastic day. You can successfully propagate a peperomia plant very easily, all you have to do is try. Good luck!

Editor’s Recommendations

Juicy Secrets: A Guide To Growing Strawberries In Pots

Potassium for Houseplants: How to Use It for Happier and Healthy Plants?

All About Worm Castings and Their Benefits to Plants & Soil!